Technical data HS 120/HS 200

  HS 120 HS 200 HS 200 Spinfeed
Wood entry length 110 - 900 mm 110 - 900 mm 110 - 900 mm
Wood width 37 - 152 (203) mm 37 - 152 (203) mm 37 - 152 (203) mm
Wood thickness 16 - 55 mm 16 - 55 mm 16 - 55 mm
Wood exit length 3,000 - 6,100 mm 3,000 - 6,100 mm 3,000 - 6,100 mm
Press force 120 (145) kN 120 (145) kN 120 (145) kN
Max. Timber cross section with a finger joint length of 10/11 mm (softwood) 100 (120) cm² 100 (120) cm² 100 (120) cm²
Max. Timber cross section with a finger joint length of 10/11 mm (hardwood) 80 (96) cm² 80 (96) cm² 80 (96) cm²
Performance (vertical finger joint) with 30 mm x 90 mm x 400 mm - - -
Performance (horizontal finger joint) with 22 mm x 50 mm x 350 mm 42 m/min 70 m/min 70 m/min
Type of feeding system Feeding line/brush feeding Brush feeding Brush feeding
Type of shaper Horizontal shaper combination Horizontal shaper combination Horizontal shaper combination
Type of separation Automatic Automatic Automatic
Type of press Two-channel press Two-channel press Two-channel press
Statistics function Standard Standard Standard
Diagnostic system Standard Standard Standard
Multiple lengths Standard Standard Standard
Number of intermediate steps Infinity Infinity Infinity
Avoiding splintering in wood (scoring unit) Standard Standard Standard
Min. wood thickness 16 mm Standard Standard Standard
Max. wood thickness 72 mm Option Option Option
Max. wood thickness 100 mm - - -
Min. wood width 30 mm Option Option Option
Vibration stop - - -
Wood adjustment monitoring Option Option Option
Quality monitoring Option Option Option
Splinter protection - - -
FlankenJet glue comb Standard Standard Standard
Communications (Teleservice) Option Option Option
Performance reserves cutting spindle - - -
Frequency-controlled feed type - - -
Servo-controlled feed type Standard Standard Standard
Drive performance - cutting spindle 15 kW 15 kW 15 kW
Drive performance - hogger (+ scoring unit) 11.5 kW 11.5 kW 11.5 kW
Performances are given with 100% availability and vary in actual operation.